Vinyl lettering and graphics should be applied at a minimum temperature of 10°c on to a smooth, sound and clean surface. It is possible to apply vinyl at lower temperatures but do so with care as the vinyl becomes less flexible.

It does not matter if there is some moisture but any trace of grease, dust and grit should be eliminated so make sure the target surface is clean.

 

  1. First, position your graphics on the surface, still on the backing paper.
  2. Use a strip of tape to secure the graphics to the surface centrally.
  3. Peel the backing paper away from one half.
  4. Place the graphic down and then smooth out with a flat edge.
  5. Remove backing on second half and smooth down.
  6. Finally, remove transfer tape across the whole graphic.